Spring Term Starts April 5th!   Contact Us 1-866-BERKLEE (USA) or +1-617-747-2146 (INTL)
Welcome, Guest
Please Login or Register.    Lost Password?
Berkleemusic Forums
Music Production
Digital Audio Workstations
need to use sonar 7, with my digi 003 interface.
Go to bottomPage: 1
TOPIC: need to use sonar 7, with my digi 003 interface.
#26501
need to use sonar 7, with my digi 003 interface. 9 Months ago
i use gigi 003, digidesign oo3 factory, but i tried runing it with sonar 7 but its not working. please is there any way i could use sonar 7 with digi 003? please i need help from anyone that knows how to go around this. thanks
Please note: although no board code and smiley buttons are shown, they are still usable.
Orianel Aloghemen
Posts: 41
Offline
 
#26502
Re: need to use sonar 7, with my digi 003 interface. 9 Months ago
Hi Orianel,

If you are using an 003 Factory, you may want to try the firmware update here.

www.dv247.com/news/Digi%20003%20Firmware...20MIDI%20Mode/131360

You may also need to get the Digidesign standalone drivers if you do not also have Pro Tools installed on your system.

www.digidesign.com/index.cfm?navid=54&am...d=1&itemid=23882

After this, open Sonar and go to Options > Audio. Set the 003 for the Timing Masters in the General tab. Go to the Drivers tab and make sure it is checked under the Input and Output drivers. You should be all set after this.

Sincerely,
Rob Fusco
Berkleemusic
Customer Service Rep
Please note: although no board code and smiley buttons are shown, they are still usable.
Robert Fusco
Posts: 82
Online
 
Page: 1
Berkleemusic Forums
Music Production
Digital Audio Workstations
need to use sonar 7, with my digi 003 interface.
Moderators: Liam McCormack
get the latest posts directly to your desktop